"The one website where EVERYONE in the Fiber Optics Industry meets!"
copyright 2011 FiberOpticsCleaning.com - All rights reserved . info@fiberopticscleaning.com
Are you on the FiberOpticsCleaning.com email list?
Subscribe
Methods for Cleaning Caps and Plugs
Clean with alcohol, either by swab or spray. Blow dry with canned air or wipe dry with a lint-free swab or wipe.
Cotton swabs are not recommended, as fibers will create a lint contamination.
Ultrasonic cleaning in a bath of 99% alcohol, followed by wet swab cleaning and drying can also be done.
It is important to regularly clean caps and plugs when frequently re-used. Cleaning is done in a similar manner as cleaning connectors and adapters, except the extreme care is not necessary because scratches and damage to a protector cap or plug will not affect a system's performance. Oils, dirt, and dust must still be removed to avoid contamination and damage to the very same thing you are trying to protect. Cleaning also eliminates cross contamination when re-using protector caps and plugs on other connectors and adapters.